Home Contact Us
  Products List
  Sand casting
  Lost wax casting
  Coated sand cast
  Water glass casting
  precoated sand cast
  Investment casting
  Silica sol casting Parts
  Lost Foam casting parts
  Coated sand casting
  precoated sand casting
  Steel Casting
  Steel Sand casting
  Carbon steel casting
  Alloy steel casting
  Stainless steel casting
  High Manganese steel casting
  High Cr iron Casting
  Ductile iron casting
  Railway Wheels
  Grey iron casting
  steam trap valve
  Resin sand casting
  Top Cup For Cuplock Scaffoldding
  Construction fork head
  Excavator tooth
  Valve body-01
  Anchor casting
  Valve body-02
  C-clamp casting
  motor timing belt pulley
  valve base
  pipe foundation castings
  overhead conveyor line parts
  Coupler yoke
  railway base plate
  Petroleum Pipeline Parts
  weight distribution hitch
  Engine Rocker Arms
  garbage truck castings
  Stoker Grate Parts
  casting tractor suitcase weights
  Evaporative Pattern Casting
  Cast iron
  Cast steel
  Stainless steel Tension rod
  Foundry part-01
  grout coupler
  Foundry part-02
  sugarcane shredder hammer
  Precision casting
  Foundry part-03
  Railway anchorage
  Foundry part-04
  Foundry part-05
  Foundry part-06
  Foundry part-07
  Foundry part-08
  Foundry part-09
  Foundry part-10
  Foundry part-11
  Foundry part-12
  Foundry part-13
  Foundry part-14
  Foundry part-15
  Foundry part-16
  Foundry part-17
  Foundry part-18
  Foundry part-19
  Foundry part-20
  Foundry part-21
  Foundry part-22
  Foundry part-23
  Foundry part-24
  Foundry part-25
  Foundry part-26
  Foundry part-27
  Foundry part-28
  Foundry part-29
  Foundry part-30
  Foundry part-31
  Foundry part-32
  Foundry part-33
  Foundry part-34
  Foundry part-35
  Foundry part-36
  Foundry part-37
  Foundry part-38
  Foundry part-39
  Foundry part-40
Contact Us

Add: Room 1204, Tiantong nan road 577-39#, Yinzhou  District,  Ningbo 315100, China
P.C: 315100
Tel: +86-574-88189478

Welcome to Foundry part-07
We are a China foundry factory,Producing all kinds of foundry parts,foundry process in 4 ways,water glass foundry,Silica sol foundry,sand foundry,lost foam foundrywater glass process is cryogenic lost wax,Silica sol process is mesothermal lost wax,We are the leading China foundry factory. The foundry parts In our China Inc is in good quality.Our foundry parts use below materials oftenly, mainly carbon steel,alloy steel,stainless steel,Mn steel,high-temperature steel,heat resistant steel,Ni base alloy,ductile iron,gray iron,Cr iron,grey iron,Copper,Brass,Bronze,aluminum.... We can produce foundry parts according to your requirements.Our foundry factory have different sizes of foundry parts,Water glass foundry, the tolerance we can reach 8062 CT7-9,the weight range is 0.5-80KG,the dimension within 800mm Silica sol foundry we can reach 8062 CT5-7,the weight range is 0.1-80KG,the dimension is within 800mmSand foundry we can reach 8062 CT10-13,the weight range is 50-200000KG,the dimension is within 5000mmlost foam foundry, the tolerance is 8062 ct8-9,the weight range is 0.20-150KG,the dimension is within 1000mm,Nord foundry factory has emerged as one of the top innovators among, Our foundry parts are exported to America,Canada,England,France,Germany,Australia South Africa Holland,Spain market...! Our foundry parts are not fracture, wear-resisting, greatly reducing replacement and improve working efficiency.We have strict quality by the user consistent high praise. If you need foundry parts, please feel to contact us. Nord foundry factory will provide you best price with high good quality! Nord foundry factory in China,starting since 2001, is a specialized in manufacturing all kinds of foundry parts. The reasons to choose us:1.Good Service.OEM and ODM service offered.1 year limited warranty for defective items(excluding items damaged and/or misused after receipt)2.Specialized foundry Enterprise in China.Simulation of the foundry system,Proficient in 3d design software,solidworks,Pro.CAD with rich experienced technical teams,Provide Complete foundry Solutions3.Quality Assurance.Well-equipped testing facilities,Good quality control system4.Competitive Prices, First Choice.Save Cost Creating Values for You.
Pages:1/1 Items15 Total:9
Process Description
Investment Casting
There are three techniques in our investment casting process including water glass technique casting, silica sol technique casting and lost foam casting. 
Water glass technique casting 
Water glass technique casting is also called cryogenic lost wax. And the dimension tolerance we could reach is CT7-8.The main material is carbon steel, alloy steel. The weight controlled is about 0.2-80 kg. 
Silica sol technique casting 
Silica sol technique casting is also called mesothermal lost wax. And the dimension tolerance we could reach is CT5-6.The main material is stainless steel ,carbon steel, alloy steel. The weight controlled is about 0.1-60kg.
Lost foam casting 
Lost foam casting is a modern form of investment casting that eliminates certain steps in the process. And the dimension tolerance we could reach is CT8-9.The main material is gray iron, dutile iron, high Cr cast iron, resistance cast iron. The weight controlled is about 0.2-100 kg.
Investment casting process

1. Mould Designing

Strictly making 3D model based on customer's drawing dimensions, and mastered the contractibility rate for all types of material.

2. Wax Injection
Wax design of the desired castings are produced by injection molding. These designs are called patterns.

3. Assembly
The patterns are attached to a central wax stick, called a sprue, to form a casting cluster or assembly.
4. Shell Building 
The shell is built by immersing the assembly in a liquid ceramic slurry and then into
a bed of extremely fine sand. Up to eight layers may be applied in this manner.

5. Dewax 
At this point, all of the residual pattern and gating material is removed, and the ceramic mold remains. The mold is then preheated to a specific temperature and filled with molten metal, creating the metal casting
6. Mould Shell Roast:
This process is to put the lost-wax shell into the roast furnace and make them harder. Heating the Mould shell before casting is also to ensure the better products surface texture.
7. Smelting the Liquid Steel:
Allocate the chemical composition and sampling before steel casting.
8.Spectrochemistry Analysis
Inspection on materials by spectrometer testing.
9. Conventional  Casting
In the conventional process, the shell is filled with molten metal by gravity pouring.
10. Cut Off 
The parts are cut away from the central sprue using a high speed friction saw.
11.Heat Treating
Carbon steel and low-alloy steel need normalizing and temper, oil-quenching, water-quenching and so on. We can set out different heat treatment method as per different requirement from customers.
12. Polishing
Polishing is to modify the out of flatness on casting head after casting  cuttig and to modify the burring and splashings in the process of casting cycle.
13. Inspection:
Inspection of the mechanical properties, surface, internal quality, and to check if the rough dimension meet the drawing requirement for the prodcuts.
14. Machining
Cut the piece of raw material into a desired final shape and size. Now we have CNC, Lathe, milling machine, drilling machine, boring lathe and grinding machine.
15.Quality Inspection:
Quality inspection on the machining dimension. Mainly tools we use is like specialized gauge and callipers, mircocalliper,three-dimensional and  so on.
16. Storage and Delivery
Efficiency of package goods delivery on time per your shipping requests.
Advantage of investment casting
Wide Application Scope 
Our investment casting process is virtually unrestricted by the size ,thickness and shape complexity.
Wide Choice of Alloys 
Our investment casting process able to utilize a wide variety of alloys for common carbon steel, alloy steel, manganese steel,stainless steel ,and high-Cr & wear-resist Iron and so on. 
Dimensional accuracy
The investment casting process is capable of producing foundry with higher accuracy than ordinary forgings and weld assembly in general condition.
Reduction of Production Costs
Investment castings are able to reduce costs in many cases such as reduced machining, less materiel waste and so on.
In addition, we own CNC machining center and CNC Lathe, so machine parts (machining parts or machinery parts),metalwork (metal products) are ok for us!